Skip to main content

TDGR US Import Cross-Docking – All We Want are the FAQs…*

Cross-Docking is Reshipping

On February 8 Transport Canada issued an addition to FAQ regarding the Transportation of Dangerous Goods Regulations (TDGR) Part 9, s. 9.4. This section deals with the re-shipping of dangerous goods (DG) received by road from the US when safety marks differ from those specified in the TDGR. In general, (more on this later**), TDGR 9.1 allows receipt of US shipments to first destination with the safety marks that were legally applied under 49 CFR at the US shipping point.

Cross-Docking

The FAQ defines “cross-docking” as “the process of transferring dangerous goods from one vehicle to another before reaching their final destination”. Changing drivers or tractor units does not trigger the term. When DG are cross-docked, Transport Canada considers this to be “re-shipping” and the provisions of TDGR 9.4 apply (note: although the FAQ refers to “reshipping” in quotes, the term is not specifically defined in the TDGR other than as described by s. 9.4).

Reshipping

Basically, the requirements in s. 9.4 are to remove placards which do not meet TDGR requirements and replace them with TDGR-compliant versions. Examples of these could be US “DANGEROUS” placards; or those with the midline adjusted (e.g. Class 7, 8, 9); or worded and “combustible” placards.
In addition, if means of containment (soon to become “packaging” we hope!) have labels or other safety marks differing from TDGR requirements, then the shipping paper must be annotated accordingly as indicated in s. 9.4 (2).

Part 10 is not referenced in the FAQ, but presumably similar logic will apply to cross-docking rail car shipments (TDG s. 10.4) – or to transfers between rail/road vehicles.

Just the FAQs

Although the author hasn’t seen anything in official consultation documents, statements in casual conversations on two occasions indicate that the current practise of including interpretative guidance as italicised text within the body of the regulations will likely be discontinued. Apparently, this very useful (in my humble opinion) practise is at odds with regulatory convention that expects only the mandatory legal requirements to appear in the regulation. FAQ are the preferred vehicle for the type of information we currently see italicised within the TDGR.

The FAQ referred to in this Blog is available at:
https://tc.canada.ca/en/dangerous-goods/safety-awareness-materials-faq#a99_0

* with apologies to Sgt. Joe Friday/Jack Webb’s often misquoted statement:
http://www.snopes.com/radiotv/tv/dragnet.asp

** Reciprocity has its limits
Although we often hear of “reciprocity” for shipments inbound from the US, we must remember that it has limits. As referenced in the above-mentioned FAQ, the “inhalation hazard” version of Class 2.3 and 6.1 labels or placards are not acceptable even to first destination. The “regular” versions, applied with qualifying marks as required by TDGR SP 23 also need to be present. Similarly things done by US special permit- although potentially to be accepted to first destination under the CG I International Harmonization proposal- will not necessarily be approved for reshipping. Perhaps once the CG II is finalised we’ll have another Blog on this aspect…

Welcome to ICC

Which site would you prefer?