How should you provide quantity on a shipper’s declaration for an engine?
Generating a shipper’s declaration for an engine isn’t exactly new to me. I have been creating shipper’s declarations for engines since the very first time I stepped into the DG packaging world, and that was a long time ago. Therefore, it hit me pretty hard when a client’s shipment, containing an engine, was rejected by their air carrier.
Engines and UN Numbers
For many years the UN number for engines and vehicles were the same and it was classified as hazard class 9. Just recently it was changed so that each type of engine has their own UN number and hazard class. Therefore, internal combustion engines containing flammable liquid is classified as UN3528 and falls under hazard class 3.
My client said there was a small amount of diesel fuel inside (it wasn’t drained). Based on this I classified his engine as UN3528. He provided me with the completed shipment detail form which provided me with all the details of the shipment including net weight of the engine and the amount of fuel inside the engine.
Quantity of the Engine on the Shipper’s Declaration
I started to work on the shipper’s declaration and had to stop at the “Quantity and type of packing” section. There wasn’t an immediate measurement I could use for the engine. As per column “J” and Continue Reading…
A freight forwarder contacted me to get some help on shipping perfume to Hong Kong. I asked him how he is sending it and he replied, “Air.” I said, “That’s simple.” It would fall under ID8000, Consumer Commodity. Explained to him what that actually meant. Basically, it’s goods that are “packaged and distributed in a form intended or suitable for retail sales for purposes of personal care or household care”; however, there are a few restrictions such as only certain hazard classes and packing groups are permitted. Perfume definitely falls within the criteria.
He came by our office and dropped off 8 decent sized boxes of these goods. I asked the forwarder if he plans on shipping the boxes individually or will be consolidating them (e.g, on a pallet). He said his plan was to take the boxes back to the office once I prepare the boxes and he will palletize it. I advised him he can’t do that, because that would be considered an “overpack” and would require marking and labeling on the outside of the shrink wrap (assumed it would be shrink wrapped). He said “Oh”. I told him we could help him. We will provide the shrink wrap and prepare the shipment completely at our location. He said he already had a heat-treated pallet (all wooden pallets must be heat-treated Continue Reading…