The Pipeline and Hazardous Materials Safety Administration (PHMSA) issued another final rule on November 7th. Again, this rule making is the only way to amend or change Title 49 for Transportation in the Code of Federal Regulations. In this case, the docket number is HM–219. Its goal is to “to update, clarify, streamline, or provide relief for miscellaneous regulatory requirements”. It has an effective date of December 7, 2018. While the published rule is only 20 pages long there are many areas of revision. Below is a list of the items that jumped out at me while reading it. If you wish to read the full rule making, please visit https://www.phmsa.dot.gov/regulations-fr/rulemaking/2018-23965.
- Section 172.205 had changes to paragraph (j) which pertains to the Hazardous waste manifest. You are now allowed to use electronic signatures when completing EPA forms 8700-22 and 8700-22A.
- Section 172.407 had revisions to paragraphs (c) and (f). Paragraph (c) now says “inner border approximately 5 mm inside and parallel to the edge”. It still says the inner border must be 2 mm wide and that the thinner line border labels can be used until the end of the year. Paragraph (f) has included some additional references. It now says, “a label conforming to specifications in the UN Recommendations, the ICAO Technical Instructions, the IMDG Code, or the Transport Canada TDG Regulations … may be used in Continue Reading…